After weeks, months, and years of neglect is it any surprise that your carpets look dull and tired? I’m sure you wouldn’t look at your best either without a little TLC now and again. So many people spend a small fortune on installing a magnificent carpet, just to allow it to fend for itself.



Without adequate maintenance and care, carpets cannot protect themselves against spills by children, dirt and fleas from pets, dust collected over years, mud brought in on shoes etc. If you are planning on throwing out a carpet that you haven’t had for long just because it looks a little tired, try steam carpet cleaning.



Before you waste hundreds of pounds replacing a half decent carpet, contact a carpet cleaning company to see if they can help you out. Steam carpet cleaning can immediately freshen up carpets, bring their colour back and revitalise the fibres. You might find that your carpet doesn’t need replacing after all, just a thorough cleaning.



After the clean you will probably notice a huge difference in the look, feel and smell of your carpets – for the better hopefully! Of course this will not be good enough in all cases, and it is not good enough to do on a one off. Steam carpet cleaning is an important part of maintain a carpet, it needs to be done around every 12 months but this will differ depending on your lifestyle.



Prokleen Carpet Cleaners offer high quality steam cleaning at really affordable prices. It is important that you do stick to your cleaning routine as carpets that do receive this treatment have been proven to last much longer – even two, three, or four times as long.



Regular treatments will save you lots of money in the long term as it will prevent you from having to replace your carpets regularly. Next time you are thinking of pulling up that tired looking carpet, give it a steam cleaning treatment first as you might find that this breathes a new life into it.

Our commercial carpet cleaners will carry out the below steam cleaning process to ensure your carpets get the best cleaning possible:


1. HIGH-FILTRATION CLEANING SYSTEM (if required).  The first stage is to use a high filtration vacuum that has been specifically designed for high performance professional carpet cleaning.


2. MOVE FURNISHINGS. We will move large furnishings such as chairs and tables.  We kindly ask that any valuable items such as ornaments are moved before we arrive.


3. SPECIALIST STAIN REMOVAL. We will use our professional stain removal products and techniques to remove difficult stains.  Although stain removal is not a guaranteed service, we do have a very good track record of removing most stains.


4. HEAVY-DUTY PRE-SPRAY. We then apply a heavy-duty pre-spray specially designed to electro-mechanically lift oily dirt and pollutants from your carpet so they can be quickly and safely extracted using our high performance extraction machines.


5. HOT WATER EXTRACTION MACHINE. Our high pressure hot water extraction machines (steam cleaning machines) are state of the art to ensure the best clean possible.  The extremely powerful units we use shoot the cleaning solution into the carpet at high pressure. This helps to break up the dirt, bacteria and pollens in the carpet. The machine then produces a triple vacuum to draw the dirt and cleaning treatments out of your carpet.


6. RESIDUE RINSE. We use the extraction machine to ensure a residue free rinse that ensures the integrity of your carpet and helps to retard re-soiling


7. PROTECTIVE FOIL TABS. Your furniture is positioned back onto the carpet with protective foil tabs and Styrofoam blocks under the legs. This is to prevent the colour-stain from the furniture leaching onto the carpet while it is moist.


8. GROOMING. Where, appropriate your carpet will be groomed using a grooming rake.  This will ensure the fibres are tangle-free and your carpet is left in its best possible condition.


9. OVER SHOES.  Before we leave your property we will leave you with slip on over shoes that can be worn while the carpet is drying.

Upholstery cleaning in a customers home in Warrington, this sofa cam up lovely as you can see.

One of our specialists cleaning stair carpets in customer home in warrington.

Types of carpet

Understanding a a small amount of down-to-earth basics concerning carpet will help you produce the correct choices for your lifestyle and finances.

Cut pile:  Still one of today's mainly common carpet constructions, cut pile achieves its durability through the type of fiber used, density of tufts and the amount of twist in the yarn.  Highly twisted yarn will embrace its form longer, making it a smart selection for high-traffic areas.

   Textured Plush — Most decoratively versatile.  Textured surfaces help bury footprints and vacuum marks.  Add causal beauty to every room.  Preferred design for demanding households.  A splendid “whole-house” carpet.
   Saxony — Refined surface. Works well with traditional interiors.  Ideal for living and dining rooms.
   Friezé — Forms a "curly" textured surface since yarns are really twisted.  Has an informal look.  Helps reduce footprints and vacuum marks.
   Plush (Velvet) — Has a dense luxurious feel.  Shows footsteps and vacuum marks without difficulty. Most excellent for low traffic areas and official rooms.
Level loop pile:  Here loops are the same height, creating an informal look.  This design generally lasts a long period in high-traffic areas.  Many of today’s well-liked Berber styles are level loop styles with flecks of a darker color on a lighter background.  This is a excellent preference for contemporary to lodge furnishings.

Multi-level loop pile:  This design usually has two to three assorted loop heights to create pattern effects, providing first-rate durability and a more casual look

Cut-loop pile:  This carpet type combines cut and looped yarns.  It provides variety of surface textures, plus sculptured effects of squares, chevrons and swirls. The multicolor effects conceal soil and stains.



Facts on Carpet Fibers

Fiber selection affects carpet end use performance. Manufacturers are a valuable resource in determining the fiber and construction mainly appropriate to the application. These are the basic types of carpet pile fibers.

Nylon:  Two types, Nylon 6,6 and Nylon 6, are typically used in carpet. Nylon features include the skill to turn out a variety of color schemes, luxurious soft “hand”, tremendous resiliency, durability, scuff resistance and quality retention. Other features include superior resistance to stains and soils. Nylon is considered to be correct for all types of traffic. Solution dyed nylon provides superb color fastness and increases stain cleanability.

Olefin (polypropylene):  Olefin features include its inherent and undeviating resistance to water-based stains, its colorfastness and resistance to static electricity. Olefin is resilient to damp, making it the primary fiber used in indoor/outdoor carpet.

Polyester:  Polyester features include its luxurious soft “hand’, inherent and enduring stain resistance, and gift to produce dazzling colors. Other features include excellent abrasion resistance, fade resistance, and cleanability.

Triexta:  Triexta features include its luxurious soft “hand”, outstanding colorfastness and clear colors, inherent and eternal stain resistance. Other features include durability, resistance to fading, cleanability, texture preservation and resiliency.

Wool:  Wool is a natural fiber distinguished for its luxury and performance. Its features include soft “hand”, tall bulk, color variety and inherent flame retardant

Professional carpet cleaning

The correct Means of Bonnet Cleansing Ones New carpet

The actual hood strategy in spot maintaining is really a "Surface Maintaining System". Once correctly fulfilled inside your housekeeping services routine, that hood strategy is cast as an intrinsic task ınside your strategy through little expense. In cases where achieved the right way, it technique will be able to improve an important carpet's visual aspect along with astonishing effects.
  
Supplies & Equipment
Single disc floor machine with pad driver
Carpet bonnets: Regular or MicroFiber
2 or 3 gallon pressurized spray tank
Recapture - Encapsulating Detergent
Unbelievable Pro stain remover
Wet floor signs
Carpet drier

Procedure

Vacuum clean the carpeted parts and remove all visible spots and stains prior to bonnet cleaning your floor covering surface.
Put wet floor indicators at easy-to-see locations nearby the entrances into the region being cleaned.
Premix the encapsulating detergent using the right quantity of Hot water. Fill the appropriate spray tank with all the pre-mixed detergent and pressurize your own tank. Combine in small batches, this will keep the water temperature high.
Spray carpet bonnet with the pre-mixed solution of detergent and spray a location of carpet (10' x 10') with all the same detergent, holding the nozzle from the sprayer at least 12" above floor surface.

Allow the detergent to dwell on the carpet for at 1-2 minutes.
Position the floor machine with all the bonnet and agitate carpet surface with floor machine and move in a left to right pattern (overlapping through one quarter) and continue on. General dry times range between 20 to 30 minutes, dependant on relative dampness condition.

Allow carpet to completely dry before extracting Wet Floor signs and beginning to traffic. Carpet Drier will aid in the drying process. Make sure to hoover the floor covering within 6-8 hrs. The crystallizing technology associated with Recapture is created so your encapsulated soil could end up being extracted through routine post-vacuuming.

Even if you remove all visible evidence of the gum or adhesive, those spots often come back a few weeks due to remaining sticky residues.

An adhesive challenge : Although never recommended, many of your residential customers or facility occupants reach for duct tape (or perhaps equivalent adhesive) to hold down extension cords, cover up seams or attach other items to the floor. After a period of time, the tape is taken up and an ugly, grey adhesive mark is left behind.
As the  carpet cleaner, you are then expected to simply clean the location and create miracles.Even if the obvious adhesive residue is taken out (typically with dry solvents) it is very difficult to remove just about all residue. What is left behind is definitely an invisible sticky residue that may collect soil rapidly and create a complaint within a short period of time, possibly just days following your cleaning is accomplished.

Eating Gum - an identical story - Just a few pieces of chewed, smashed gum in a property or company isn't that big issue. But clean a massive commercial job - like a cinema - with a bit of gum every square feet or two, and you think hard about adjusting career. Probably something easier and much more glamorous, such as septic tank cleaning. What's the ideal, and fastest, way to successfully get rid of adhesive and chewing gum residues?

The right stuff - Some items of gum and larger adhesive residues are on the surface and can be scraped apart, leaving behind residue that then needs further function.
Scraping surplus gum or adhesive is essential and is the initial principle of cleaning : getting rid of excess matter from the surface.

The tool you use may differ: A spatula, made from plastic, metal or bone, works well. There are specific tools with sharp points for better agitation that can aid in this task. Right after removing the surplus matter in the carpet, you also have to manage the remaining sticky residues.

High heat helps - You can use substantial heat via hot water extraction to ease the particular chewing gum or adhesive residue and sometimes pull much of that up into your extraction machine. You can use heat having a vapor steam to transfer it to an absorbent towel. Then, with either method, you have a smaller amount of sticky residue to eliminate.
But with heat, you have correctly set the path to effective gum or even adhesive removals.
Heat softens the chewing gum or residue, extracting more than merely scraping can remove, so your cleaning products can function far better.

Cleaning  chemicals - Now you have to use your solvent chemicals. Generally there are many choices when it comes to solvent chemistry and gum or adhesive removal.
Another option is to use a gel solvent, usually one that contains the natural solvent d-Limonene. Most gel solvents can be rinsed with hot drinking water and detergent.
No matter which solvent you employ, don't use significantly. The chance of carpeting backing delamination is lessened if you are using a gel solvent. A gel solvent stays where it needs to be: On the fiber, dissolving the residues. Work the solvent in to the residue with your scraper, using plenty of force. This is where a great agitation tool with "teeth" comes in handy. The teeth permit you to get the solvent into the adhesive residue with a lot of agitation, but constantly be wary of damage to fibers. Give the section adequate dwell time, possibly up to several minutes. Don't forget that dry solvents work faster than wet solvents. Then, always rinse away the residues with hot water and detergent.

The last step - Here's where many carpet cleansers fail. They do all the above and feel they have finished the task. But do it once more. Utilize more solvent, more agitation and flush with hot water and detergent. Although after your first attempt the job looks great, there are very likely sticky residues remaining. A second application regarding solvent and rinse means reduced possibility of a callback. A word of extreme care: Any residue left over will re-soil.
Professional carpet cleaning

1. Hoover frequently and thoroughly. Almost all of the wear and tear of carpet is caused by soil. Oily soil attract more oily soil and frequent vacuuming will greatly reduce soil build up

2. Reach stains quickly, 99% coming from all staining can be eliminated by one soap or an alternative if they're cleaned inside first few days. The longer a discolor chemically reacts with all the carpet the tougher it will be to get rid of it.

3. Try out carpet before scrubbing up, getting rid of or picking out. All carpets are different. A few carpets are very hypersensitive to acid solution type cleaners and will lose his or her color quickly. Other carpet dyes are sensitive for you to harsh alkalis.

4. Use suitable spotters starting with the mildest. Tend not to use harsh spotting providers unless essential and always counteract high alkaline as well as high acid cleaners immediately after use.

5. Under no circumstances dig as well as brush locations. The proper procedure is to scrape the location towards the middle and and then tamp the location into your white soft towel or cloth using a brush or other tamping devices. A new meat tenderizer makes a great tamping instrument.

6. Tend not to overuse liquids, shampoos as well as spotters. Excessive detergent can lead to residue still left in the carpet that will even thorough vacuuming may not get rid of.

7. Tend not to overwet carpet. Each of our carpet detergents are chemically productive enough so they don't need a huge amount of wetting. Over-wetting can cause brownout, carpet shrinking, adhesion problems and other sorts of nightmares.

8. Remove residual if possible. Rotary scrubbing up will clean the rug fibers the best by encapsulating dirt and detergent deposit, which powders off the carpet. Periodic extraction will flush out this specific dirt and other organisms serious in the carpet.

9. Never "coat" a dirty or spotty rug. Following scrubbing or extracting a dirty carpet, if you're not satisfied with the results, tend not to apply a coat involving carpet guardian as this can lead to "gluing inside dirt" making it harder to remove it the next time. Sometimes re-scrub or extract the rug or keep the carpet clean until the next cleaning routine before you coat.

10. Hoover frequently and thoroughly. It can be so important it justifies two recommendations. Vacuum often and thoroughly.